AQUATACK L-300

Water based adhesive of natural rubber latex.
Organic solvents free.
Free of all Substances that are a health risk according to R.D. 363/1995, Rules and Regulations on
Dangerous Substances.

IDENTIFICATION OF THE RISKS FOR THE PREPARATION.
Special dangerous indications for humans and environment: none

FIRST AID.
Remove contaminated clothing.
If wearing contact lenses, remove them. Wash eyes with plenty of clean and cool water for at least 10
minutes while pulling eyelids up, and seek medical assistance.
Wash skin vigorously with water and soap or a suitable skin cleaner. NEVER use solvents or thinners.
If accidentally ingested, seek immediate medical attention. Keep calm. NEVER induce vomiting.

FIRE FIGHTING MEASURES.
No flammable product.
Extinguisher powder or CO2. In case of more serious fires, also alcohol-resistant foam and water
spray. Do not use a direct stream of water to extinguish.
Fire can cause thick, black smoke. As a result of thermal decomposition, dangerous products can
form Hidrogen Cloride.

MEASURES TO TAKE IN CASE OF ACCIDENTAL SPILL.
Prevent the contamination of drains, surface or subterranean waters, and the ground. In case of large
spills or if the product contaminates lakes, rivers, or sewers, inform the responsible authorities
according to local legislation.

HANDLING AND STORAGE.
Handling of the product does not need special protection measures.
To be stored in a well sealed container, with temperature between 5°C and 30ºC.Protect from freezing,
because product freezes irreversible.
In these conditions and before opening the container, stability of the product os good for a 6 months
period.

EXPOSURE CONTROL/PERSONAL PROTECTION.
For prolonged or repeated contact, use polyvinyl alcohol or nitrile rubber types of gloves and protective
goggles especially designed to protect against liquid splatters. Even though harmfoul effects are not
expected from inhalation of vapours, continued breathing of pulverization fog must be avoid if there is
spray application.

PHYSICAL AND CHEMICAL PROPERTIES.
Physical state: Milky white coloured liquid.
Freezing point: Between 0 and 5&degC, aprox.
Boling Point: Aprox. 100 &degC
Specific gravity: Between 1 and 1.12 gr./cc 20°C
Solubility in water: Miscible in all proportions.
pH: 9 to 12

STABILITY AND REACTIVITY.
No decomposition during its adequate use

TOXICOLOGICAL INFORMATION.
Skin: Slightly irritant after continuous and repetitive contact
Eyes: Continuous exposure to pulverization fogs are irritant
Inhalation: Continuous inhalation could cause irritation of the mucous membranses and respiration
system.
In case of appropiate use, from our knowledge no damages should be expected.

ECOLOGICAL INFORMATION.
The product must not be allowed to go into sewers or waterways.

ELIMINATION CONSIDERATIONS.
Attending to actual local legislations concerning to industrial residues, neither product nor its residue
(including the container), are considered toxic or dangerous.

INFORMATION PERTAINING TO TRANSPORT.
Product not affected by dangerous goods transport legislations.

REGULATORY INFORMATION.
Product not affected to labelling according to actual EU Directives for dangerous preparations.